WaterClinic LOTUS-72, Руководство пользователя

Страница: 20 / 56

ENG 18
Notes
• When any of the following situations occur, immediately disconnect
the water purifier water source (close the inlet water ball valve) and/or
the power source and carry out repairs.
- If the water purifier pipes or related components are leaking.
- If the water purifier and/or components stop working.
- If any components leak electricity.
- If there are any other anomalies or failures.
• When you go out or do not use the machine, disconnect the water
purifier's water source (close the inlet water ball valve) and/or power
source.
• If the water purifier parts are damaged, it is recommended that the water
purifier be entrusted to the manufacturer or distributor, service center,
or specialized technical personnel for replacement to prevent loss caused
by improperly performed maintenance, the manufacturer assumes
no liability for losses incurred as a result of operation or use that does
not conform with the instructions and reminders specified herein.
Packing List
LOTUS-72
1 Unit
1
1
1
1
1
1
1
1
1
1
1 Package
1
1
1
1 Roll
1
1
1
1
1
PARTS
Main Machine with Cabinet (Including Filters)
R.O. Membrane
Steel White Coating Bracket To Fit 3-Canister RO unit
Storage Tank
Filter Wrench
RO Booster Pump and Transformer 220V/50Hz with 2 Round Pin Plugs
High Pressure Switch
Low Pressure Switch
Check Valve and Male Elbow
Flow restrictor 300 ml 1/4”
Automatic shut off valve 1/4” (4 ways valve)
Standard Installation Kit consisting of
Water Inlet Valve ½”½” ¼” (3-way)
Chromed Ball Valve
Tank Shut Off Ball Valve 1/4”
Water Pipe
Drain Saddle Kit with 1/4" Screw
Chromed Osmosis Faucet
Faucet connector 1/4" x 7/16" FPT
Plastic Hanging Bracket to Fit Long Reach Faucet
User Guide (Including Warranty Card)