WaterClinic LOTUS-72, Руководство пользователя

Страница: 14 / 56

ENG 12
Instructions for Proper Installation
• Method of installing the inlet water metal hose and 3-way inlet water joint:
(If the metal hose diameter is 9 mm the 3 - way inlet water joint must be
purchased separately) First, close the inlet water valve. Screw off
the metal hose. Remove the 3-way inlet water joint from the water
purifier accessories box, screw one end of the inlet water 3-way joint
onto the inlet water valve outlet. One end of the unscrewed metal hose
should be screwed into the 3-way inlet water joint using the screw nut.
(See Diagram 8)
• Method of installing the 3-way inlet water joint and inlet water ball valve:
Take out the inlet water ball valve from the water purifier accessories
box, wrap one end of the external threads on the ball valve with
appropriate teflon tape (See Diagram 9). If you have silica gel, spread
a little over the thread and then screw the ball valve into
the corresponding hole of the 3-way inlet water joint (See Diagram 9).
Take out the Ø 9mm water pipe from the accessories box. Using a pair
of scissors, cut a suitable length of pipe and connect one end of the pipe
to the inlet water ball valve (See Diagram 10). Finally screw the nut in
place.
Diagram 8
Faucet Water Hose
Connector
Washer
Washer
Inlet Water Valve
Inlet Water Valve
Screw Nut
3-Way Inlet
Water Joint
Diagram 9
3-Way Inlet
Water Joint
Inlet Water
Ball Valve
Teflon Tape
Water Pipe
Connection
Diagram 10
9mm Ball Valve
Inlet Water
3-Way
Joint