WaterCare TotalCare Series, Инструкция по установке и руководство пользователя

Страница: 34 / 36

34
MANUAL REGENERATION
NOTE:
For softeners, if brine tank does
not contain salt, fill with salt and wait
at least two hours before regeneration .
If you need to initiate a manual
regeneration immediately, press and
hold
REGEN
until valve motor starts
(typically 3 seconds) .
ERROR
If the display toggles between “Error”
and an error code (i .e . a number), call
a service technician and report the
error code .
BYPASS VALVE OPERATION
To shut off water to the system, position arrow handles as shown in
the bypass operation diagram below . If your valve doesn’t look like
the diagram below, contact your service technician for instructions
on how to shut off water .
REGEN TODAY MON
GPM
2:40 8
PM
REGEN TODAY
and
TIME OF DAY
will flash alternately if a regeneration
is expected tonight.
NORMAL OPERATION BYPASS OPERATION
ERROR
106
CALL FOR SERVICE
QUICK REFERENCE GUIDE:
GENERAL OPERATION
When the system is operating, one of six displays will be shown:
1 . time of day/gpm
2 . flow rate
3 . vacation mode
4 . capacity remaining
5 . days to a regen
6 . dealer name and phone number
Pressing
NEXT
will toggle between the six choices .
TO SET TIME OF DAY
In the event of a prolonged power outage, time of day flashes,
indicating that this needs to be reset . All other information will be
stored in memory no matter how long the power outage .
1 . Accessed by pressing
SET CLOCK
2 . Adjust hours with + and — buttons, AM/PM toggles at 12
3 . Press
NEXT
4 . Adjust minutes with + and — buttons
5 . Press
NEXT
6 . Adjust current day with + and — buttons
7 . Press
NEXT
to complete and return to normal operation
ON VACATION
NO
DAYS TO A REGEN
GPM
3 A
CAPACITY REMAINING
GPM GAL
1600 A
FLOW RATE
GPM
8.0
TIME OF DAY MON
GPM
2:40 A
PM
PHONE NUMBER
DEALER NA
A
CURRENT DAY
SET
MON
TIME MINUTES
SET
TIME HOUR
SET
2:00
AM
2:00
AM