10
Pool Buster Owner’s Use & Care Manual
11
Pool Buster Owner’s Use & Care Manual
BATTERY LIFE
•
The batteries are factory sealed in the motor box,
and CANNOT BE REPLACED. Do not attempt in
any way to destroy or disassemble motor box or
any of its components.
Under no circumstances should
you attempt to open the battery pack and replace the batteries
yourself. Your battery pack should give you many hours of use.
If your motor, batteries, or charger stop working, take the Pool
Buster to an authorized service center.
•
NEVER LEAVE your Pool Buster plugged in for
long term storage.
After charging, the On-Off knob should be replaced and turned to the “off”
position.
CHARGING YOUR POOL BUSTER
Your Pool Buster has a unique patented vacuum head that can be adapted
to use on all types of pool surfaces. We recommend the following:
•
For gunite, we recommend using the fi ve (5) wheels (part
no.PBW050) which came with your Pool Buster. The fi ve wheels
are inserted into the vacuum head (part no.PBA006), as shown
in the diagram. To prevent damage to your pool, ensure all fi ve
(5) wheels are fully inserted into the vacuum head before you
begin use. NOTE: Inserting the wheels into the vacuum head
may require a good deal of force. If you have trouble, you may
fi nd it easier to insert them by placing on a hard surface and
pushing down on the head.
•
For vinyl liner and fi berglass pools we recommend using the
eight (8) brushes (part no.PBW049) which came with your Pool
Buster. The eight (8) brushes are inserted into the vacuum
head (part no.PBA006), as shown in the diagram. To prevent
damage to your pool, ensure all eight (8) brushes are fully
inserted into the vacuum head before you begin use.
Note: Wheels OR Brushes must be installed prior to use.
Water Tech is NOT responsible for damages to your pool if
neither the wheels nor brushes are installed in the vacuum
head before use.
CAUTION:
Do not use the Pool Buster vacuum head without either the
supplied wheels or brushes inserted.
SETTING UP YOUR POOL BUSTER FOR USE
