chemicals. Never leave the cleaner plugged for long term storage. Recharge the cleaner
every three months.
Above warnings and cautions are not intended to incorporate all possible instances for
risks and / or severe injury.
Pool / spa owners should always exercise intensive caution and
common sense when utilizing the cleaner.
GETTING STARTED
Set Up for Battery Charging
WARNING!
Charging must be done indoors,
in a well-ventilated area away from the sunlight, children,
heat and ignition sources.
Never use the external adaptor and charging base if any damage is found.
Use the original external adaptor provided only.
Make sure cleaner and Charging Base are clean and dry before set up.
There are two different ways of setting up the cleaner ready for battery charging.
Free Standing
1. Place your cleaner on a dry, clean and flat surface with Contact Plate on the cleaner facing
upwards.
2. Slide the Charging Base wider hook inside the Hanging Slot on the cleaner handle. Press the
other end of Charging Base down into the gap (between the Filter Cone base and rear body) until
two extended hooks are secured under the tabs on the Filter Cone base.
Fig. 1
