Water Tech Pool Blaster Pulse Скачать руководство пользователя страница 4

  Under no circumstances should you attempt to disassemble the cleaner and replace the 

impeller, motor and battery by yourself.    

 

External adaptor and Charging Base :    

  For indoor use only.  

  Never use the external adaptor and charging base for purpose other than battery 

charging for the pool vacuum supplied in the same pack. 

  The external adaptor and charging base should not be used outdoor and not be exposed 

to rain, humidity, any liquid or heat. 

  Keep the external adaptor and charging base out of reach of children. 

  Never use the external adaptor and charging base if any damage is found. 

  DO NOT handle the external adaptor and charging base with wet hands. 

  DO NOT handle the cleaner, external adaptor and charging base while charging with wet 

hands and without shoes. 

  Disconnect the external adaptor from power when not in use. 

  Never attempt to open the external adaptor and charging base. 

  If the supply cord is damaged, it must be replaced by the manufacturer or its service agent 

or a similarly qualified person in order to avoid a hazard. 

  Make sure the cleaner and charging base are totally dry before charging. 

 

CAUTION!  

  This cleaner is designed for underwater use only, not for use as an all-purpose vacuum 

  cleaner. DO NOT attempt to use it to clean anything other than your pool / spa. 

    Use original accessories delivered with this product.   

    DO NOT use this cleaner right after pool shocking. It is recommended to leave the pool 

  circulating for at least 24-48 hours. 

    It is not recommended to use this cleaner with another cleaner simultaneously. 

    Avoid picking up hard, sharp objects with this product. They may damage the cleaner 

  and filter.   

    Use extra care when cleaning stairs in the pool.  

    Only use the charging base for its intended purpose as outlined in this manual.  

    To avoid damage to the external adaptor and cord, never attempt to carry it by its cord 

  or pull the cord to disconnect it from the power source and product.    

    Charge the cleaner indoor in a clean, dry place with good ventilation.   

 

If the cleaner is not to be used for an extended period, detach it from the charging base, 

 

use dry damp cloth to clean and dry the cleaner and accessories. Store them in a well-

 

ventilated area away from the sunlight, children, heat, ignition sources and pool

 

Содержание Pool Blaster Pulse















Отзывы: