Water Tech Pool Blaster Pulse Скачать руководство пользователя страница 11

WARNING!  

  Never attempt in any way to disassemble your cleaner.  

  Under  no  circumstances  should  you  attempt  to  disassemble  the  cleaner  and  replace  the 

impeller, motor and battery by yourself or hire an unauthorized service provider to replace the 
battery. The battery is specially designed for your cleaner and contains fuses for safety.   

 
CAUTION!  

  Heat can damage the battery and reduce its life. 

  The battery should last about 300 charging cycles (under proper charging and operation). 

  Consult  your  dealer  for  the  proper  new  replacement  battery  or  service  if  the  following 

happens.  

  Battery appears damaged or will not charge fully. 

  Battery operation time is noticeably reduced.   

 
BATTERY  LIFE:  Incorrect  battery  maintenance  may  reduce  the  battery  life  and  influence  its 
function. 

 

1. Should re-charge the battery after use within 24 to 48 hours.

 

2. Must re-charge the battery at least every three months when not in use.  

 

3. To allow the batteries to fully charge after long storage period, follow re-charge instructions 

above.

 

 

BATTERY DISPOSAL   

 
The maintenance free, Nickel Metal Hydride battery in your 

Pool Blaster

must be properly 

disposed of in accordance to State and local law. To confirm if recycling is required; contact your 
local authority for information.  

 
WARNING! 

Never attempt to disassemble a battery pack 

 Remove all personal items such as rings, bracelets, necklaces and watches when unwiring a 

pack from the vacuum unit. 

 A battery can produce a short circuit current high enough to weld a ring (or like item) to metal 

causing a severe burn. 

 Wear complete eye protection, gloves and protective clothing when removing the battery pack. 

 Take care not to touch wires together or allow them to contact any metal items, which would 

cause sparking and/or short circuit the battery. 

Содержание Pool Blaster Pulse















Отзывы: