30119-16 Rev. 4.9/07-09
6
2. FC101
(#34)
and sensor (#15) should be checked to
be sure they are connected and that the battery is good.
Turn the propeller by hand at a fairly fast even speed and
the indicator should display a flow rate.
3. METER SADDLE O-RING (#22)
should be inspected
for any sign of damage and covered with a thin coat of
silicone grease. The meter can now be installed in the
service line (See step II-F for proper installation). When
replacing the meter on the line, make certain that the top
of the pipeline is smooth and free of any foreign material.
Make certain that no foreign materials are attached to the
inside of the service line pipe, as any flow disturbance or
obstruction may affect the accuracy of the meter.
X. ORDERING PARTS OR RETURN TO FACTORY
Inspection of all meter components that may be replaced
in the field has been accomplished at this point. Should
any of the meter parts, upon inspection, appear to be
damaged or excessively worn, they must be replaced to
assure proper meter operation and prevent further dam-
age. Cost for replacement parts not covered by warranty
are available from current parts and price list. If it is
determined that the meter should be returned for repair,
please notify McCrometer prior to shipment. Each meter
must be properly packaged to prevent damage to the
meter in shipment.
Содержание LP04D
Страница 7: ...30119 16 Rev 4 9 07 09 7 NOTES...
