Water Right Sanitizer Plus Series, Инструкция по установке и руководство пользователя

Страница: 30 / 30

1900 Prospect Court • Appleton, WI 54914
Phone: 920-739-9401 • Fax: 920-739-9406
MANUAL REGENERATION
NOTE:
For softeners, if brine tank does
not contain salt, fill with salt and wait
at least two hours before regeneration .
If you need to initiate a manual
regeneration, either immediately, or the
same night at the preprogrammed time
for regeneration (typically 2:00 AM),
complete the following steps .
For Immediate Regeneration:
Press and hold
regen
until valve motor starts (typically 3 seconds) .
For Regeneration the same night:
Press and release
regen
(notice that flashing “REGEN TODAY”
appears) .
ERROR
If the display toggles between “Error”
and an error code (i .e . a number), call
a service technician and report the
error code .
BYPASS VALVE OPERATION
To shut off water to the system, position arrow handles as shown in
the bypass operation diagram below . If your valve doesn’t look like
the diagram below, contact your service technician for instructions
on how to shut off water .
REGEN TODAY MON
GPM
2:40 8
PM
REGEN TODAY and TIME OF DAY
will flash alternately if a regeneration
is expected tonight.
NORMAL OPERATION BYPASS OPERATION
ADJUST HARDNESS, DAYS BETWEEN REGENERATION, TIME OF REGENERATION AND ALARM BUZZER
For initial set-up or to make adjustments, please complete the following steps .
QUICK REFERENCE GUIDE
GENERAL OPERATION
When the system is operating, one of four displays will be shown:
time of day/gpm, flow rate, capacity remaining or days to a regen .
Pressing
next
will toggle between the three choices .
TO SET TIME OF DAY
In the event of a prolonged power outage, time of day flashes,
indicating that this needs to be reset . All other information will be
stored in memory no matter how long the power outage .
1 . Accessed by pressing
set clock
2 . Adjust hours with + and — buttons, AM/PM toggles at 12
3 . Press
next
4 . Adjust minutes with + and — buttons
5 . Press
next
6 . Adjust current day with + and — buttons
7 . Press
next
to complete and return to normal operation
1 . Accessed by pressing
next
and
+
button simultaneously
2 . Adjust hardness using + and — buttons
3 . Press
next
4 . Adjust days between regenerations using + and — buttons
5 . Press
next
6 . Adjust time of regeneration hour with + and — buttons,
AM/PM toggles at 12 .
7 . Press
next
8 . Adjust time of regeneration minutes with + and — buttons
9 . Press
next
10 . Turn alarm buzzer ON or OFF with + and — buttons
11 . Press
next
to complete and return to normal operation .
TIME OF DAY MON
GPM
2:40 8
PM
FLOW RATE
GPM
8.0
CAPACITY REMAINING
GPM GAL
1600 8
DAYS TO A REGEN
GPM
3 8
TIME OF DAY MON
GPM
2:40 8
PM
FLOW RATE
GPM
8.0
CAPACITY REMAINING
GPM GAL
1600 8
DAYS TO A REGEN
GPM
3 8
CURRENT DAY
SET
MON
TIME MINUTES
SET
TIME HOUR
SET
2:00
AM
CURRENT DAY
SET
MON
TIME MINUTES
SET
TIME HOUR
SET
2:00
AM
ALARM BUZZER
SET
ON
REGEN TIME MINUTES
SET
2:00
AM
REGEN TIME HOUR
SET
2:00
AM
DAYS BETWEEN REGEN
SET
6
WATER HARDNESS
SET
20
GR
ALARM BUZZER
SET
ON
REGEN TIME MINUTES
SET
2:00
AM
REGEN TIME HOUR
SET
2:00
AM
DAYS BETWEEN REGEN
SET
6
WATER HARDNESS
SET
20
GR
© 2011 Water-Right, Inc. All rights reserved.
LIT-SAN + MAN 05/17