Users Manual WG13 Alarm & Keypad 04 04 2022
•
Timer –
Allows you to
set a schedule for automated arming and disarming your alarm
system as frequently as you like, (daily or once weekly) for arming/disarming your
system automatically at a daily time. This can be useful if you want to allow someone
to enter your home, but don’t wish to give them access codes.
•
Alarm duration –
Adjust alarm sound duration from 0 to 59 minutes. If Set to 0 you
turn the alarm sound off when an alarm occurs. Please check this setting so that it is
above 0.
•
Door/window unclosed notification – This defaults to Off.
Set to On position to
receive a notification if you leave a door or window open when arming your alarm.
Note: When you arm the system, the panel will say “Hello, the door or window is
unclosed” (or sound an alarm) if you leave the door or window open, however the
alarm will still arm with the window/door open.
•
Sensor low battery notification –
Set to On position to receive a notification when
the wireless accessory battery is low battery (not all accessories have low battery alert
option).
•
Notifications on/off –
Set to Turn all notifications On or Off
•
Entry delay –
Your security system has been programmed with delay times that allow
you to enter your home and disarm your alarm before an alarm is triggered. If you
disarm the alarm too late when arriving home, it will cause a false alarm. If a false
alarm occurs, you should disarm the system immediately. Tap on Entry delay to
change the amount of delay time you have when entering your home, choose how
many seconds you wish to delay the alarm sounding, allowing you time to enter the
building and disarm the alarm in a time that’s appropriate for you.
•
Countdown with tick tone –
Set countdown tick tone to the On position to hear the
tick tone countdown from the base station during Exit Delay or Entry Delay for each
second of the delay time set.
•
Alarm call number –
Enter the phone number(s), including full country prefix, of the
person who should receive a call should the alarm be triggered. This is an automated
call and will inform the person that the alarm has been triggered with a prerecorded
message. If unanswered it will then call the second person on this list and so on. A
maximum of 5 contact numbers can be added. Voicemail counts as getting through
successfully.
•
Alarm SMS number –
Enter the phone number(s), including full country prefix, of all
the people who wish to receive an SMS should the alarm be triggered. This is an
automated SMS and will inform the persons that the alarm has been triggered with an
SMS message. The SMS will be sent to all contact numbers added to this list. A
maximum of 5 contact numbers can be added.
