Users Manual WG13 Alarm & Keypad 04 04 2022
Specifications.
Power supply:
DC9V alkaline battery;
Alarm current:
《
80mA
Static current:
<40uA
Detection mode:
CO detection
Alarm mode:
Wireless and acousto-optic alarm
Frequency:
433HZM/(1527/2262 code)
Alarm sound:
>80dB (testing distance: lm)
Emission distance:
>100m (in open air)
Working temperature:
-10~+ 55°C
Water Leak Alarm
This Wireless Water Leak Detector detects water leaks when both electrodes are flooded.
When the two sensors detect water, the red LED indicator light on the detector will be on and will
transmit a wireless signal sending a message to the alarm base station.
Once the wireless signal
is received by the alarm base station an SMS will be sent to all numbers listed in your “Alarm
SMS number” list. The SMS will advise what sensor has been triggered.
A pre-recorded phone call will be made to the number(s) saved in your “Alarm Call number”
list advising them of the alarm being set off in line with the calls protocol, a call will be made
to the first person on the calls list and if unanswered, the second number and so on until it has
reached the redial limit you have set in the app under settings.
The product can be placed in the water storage devices or the place which is possible to have
the water leakage such as basements, kitchens, utility rooms, bathrooms, garages etc.
When the LED indicate light flashes, it means it is in the low voltage.
For installation instructions go to our Quick Set Up Guide
Note:
This device must be paired with our base station to operate.
LED Indicate Light
Two Sensors
