Users Manual WG13 Alarm & Keypad 04 04 2022
Congratulations
on your purchase of our
WG13 4G & Wi-Fi Alarm System
. To ensure
proper use and trouble-free operation, we advise you to follow this Quick set up Guide and
also
read our User’s Manual first before use.
The WatchOvers WG13 4G & Wi-Fi Alarm System is a dual network system that utilises both
Wi-Fi (2.4GHz) and 4G cellular (GSM).
All sensors are wirelessly connected to the base station. In the event of alarm activation, for
example, when a sensor is triggered, a push notification will be sent through the App and an
SMS will be sent automatically to all your registered contacts. A phone call will also be made
to the 1
st
contact number and where the call is not answered it will call the next contact
number.
The system can be armed and disarmed on-site by the remote RFID tags supplied, or
remotely from anywhere, through the App. The base station can connect with up to 100
wireless sensors, 10 RFID tags, multiple wireless sirens, and an external siren.
If the building loses electrical power, the backup battery built-in to the base station provides
back up power for up to 3 hours. Alert notifications are sent to you and your registered
contacts advising you of the loss of power.
How to Set up Sensors according to their use or type
There are many different ways the alarm and sensors can be armed, giving you different
options depending on whether you are home or out.
Each sensor is designated a Zone Mode,
which defines the way in which the system responds to breaches in that zone and arming and
disarming.
To set up your sensors so that they will alert you when you want to be alerted, please choose
from the list below and ensure your sensors are designated as required. The Zone modes
can be changed at any stage but it is best to set up to suit your needs from the beginning.
Tap
Accessories
and pick the sensor you want to set, then change
Zone Mode
as follows;
Normal
Sensors set to Normal Zone are activated in Arm (full arm) or HOME Mode
(home/stay/partial arm). We recommend setting door/window sensors to
Normal Zone.
24 Hours
Sensors set to 24H Zone will activate the alarm when triggered, regardless of
the alarm status (Armed or Disarmed). This setting is useful if you have an
area in your home that you don’t want people entering or at least you wish to
be notified if someone does enter. Alternatively, if you need to be alerted if
someone opens a door to leave the house, this setting can be used.
Delay
If sensors set to Delay Zone are triggered, the panel will sound the alarm after
the delay time has passed. We recommend setting door sensors with a delay
if they are used as primary entry points as this allows you time to disarm the
alarm before the siren goes off. You can choose the length of time you need.
Home
Sensors set to Home Zone mode are only activated in Arm (Away arm). If Home
Arm Mode (partial/home arm) is used, these sensors are not armed and will
not activate the alarm if triggered. We recommend setting PIR Motion Detectors
to Home Zone. If you are at home and wish to be able to walk around your
home without the alarm sounding, this is the setting you will need.
