WatchNet MPIX-21BIMR, Руководство пользователя

Страница: 23 / 34

17
Figure 3-2 Device installation 2
3.2 Bracket Adjustment
You can use an inner hex screw to control the bracket. Please use the inner hex wrench from the
installation accessories bag to unfasten the screw. Please refer to Figure 3-6 or Figure 3-7 according
to the actual product. The horizontal angle of the rear cover can rotate 360°, the tilt angle can rotate
90° and the chassis can rotate 360°.
Please use the inner hex wrench to firmly secure the inner hex screw after you complete the setup.
Important

Please make sure the M4 inner hex screw or M4 inner hex flat tight screws are firm, otherwise it
may result in chassis vibration and the camera cannot fix to a specified angle.