- 5 -
5
3.
Siren beeps 9 times
The main unit will beep 9 times to confirm you are adding a new
remote control or wireless keypad.
4.
Activate Channel 2.
As soon as the beeps finish, activate Channel 2 on your WKP.
5.
Activate Channel 1
to test.
The Wireless Keypad is now programmed into your Watchguard
Alarm. To
confirm
this, activate
channel 1
from the WKP to check
that it arms the system.
If the system does not arm, begin this procedure again from the
start.
Transmission
The Wireless Keypad is equipped with seven (7) RF channels. These channels duplicate the
function of any Rhino RCTX Series Code Hopping Remote Control.
Remote Control Button
Channel Output
Red (or Blue on single button remote)
1
Green
2
Blue
3
Red + Green
4
Red + Blue
5
Green + Blue
6
Red + Green + Blue
7
Note: No function that requires a button to be held can currently be replicated by the WKP.
Example:
User PIN: 1234
Press
# 1234 2
