- 3 -
3
Main Features
Compatible with all Rhino Code Hopping Remote Control products.
Secure Code Hopping transmission encryption, utilizes over 4 billion random combinations
to prevent scanning, code grabbing and duplicating.
Secure user programmable 4-Digit PIN number to avoid unauthorised use.
Long Life Lithium Batteries.
Up to 7 secure transmission channels.
Backlit buttons for use during low light conditions.
Audible confirmation for each button press and on correct PIN number entry.
Audible low battery warning.
Wall mountable or portable.
SAW locked transmitter will never drift off frequency for reliable operation.
Concealed on-board antenna.
Operation
Activating the Wireless Keypad
The Wireless Keypad is first activated by pressing the ‘#’ key. A single beep tone will be sounded
to indicate the keypad is active, and the LED lights behind the buttons will also switch on.
The Wireless Keypad will be automatically deactivated if no keys are pressed within three seconds.
Changing User PIN
From factory, your Wireless Keypad is supplied with a unique Master Code. This code is required
when changing the User PIN for the first time. The Master Code can be found on the front cover of
this manual, as well as on a small sticker on the rear of your WKP. For security purposes, remove
this sticker from the WKP once you have programmed in your own User PIN number.
