Installing the VISTA Vehicle Kit
4. Strip back the sheath on the power cable and its red (positive) and black (ground) wires.
5. Crimp the black (ground) wire to the provided black (ground) wire extension with the attached
ring terminal.
Tip:
Use butt splices when you connect the wires to ensure good
connection.
6. Crimp the red (positive) wire to the provided red (positive) 7.5 amp fuse holder with the
attached ring terminal but DO NOT insert the 7.5 amp fuse in the fuse holder.
7. Connect the red (positive) and black (ground) ring terminals to the appropriate battery
connections.
8. When instructed to do so in the full installation workflow on
, connect the Smart
Power Switch power cable to the
+12 VDC
connector port on the Smart Power Switch.
9. When instructed to do so in the full installation workflow on
, insert the 7. 5 amp fuse.
Warning!
DO NOT insert the 7.5 amp fuse until you have finished
installing and connecting all the system equipment. Inserting the fuse
before you have finished the full installation can damage the system.
20
VISTA Vehicle Kit
WGD00161 Revision A
