Installing the VISTA WiFi Base
Installing the VISTA WiFi Base
The VISTA WiFi Base is required as part of the VISTA Vehicle
Kit. The VISTA WiFi Base:
l
Pairs with the VISTA WiFi or VISTA XLT camera so the
camera can associate with a local recording group
l
Acts as a Wi-Fi access point (hotspot) for the VISTA
WiFi or VISTA XLT camera
You should mount the VISTA WiFi Base in an accessible
location, for example, on the back of the console. The WiFi
Base universal bracket can be mounted in almost any
location in the vehicle, as needed.
To install the VISTA WiFi Base:
1. Position and install the VISTA WiFi Base antenna on
the windshield inside the vehicle.
Tip:
For best performance, install the VISTA WiFi antenna, at least 2 to 3
inches away from any metal, in the upper center area of the windshield.
2. Install the VISTA WiFi Base bracket and attach the VISTA WiFi Base to it.
3. Run the VISTA WiFi antenna cable to the VISTA WiFi Base and connect it.
4. Connect the VISTA WiFi Base cable to the VISTA WiFi Base then run it to the Smart Power
Switch location.
5. When instructed to do so in the full installation workflow on
, connect the VISTA WiFi
Base cable to the
Base 1
connector port on the Smart Power Switch.
VISTA Vehicle Kit
WGD00161 Revision A
17
