Installing the VISTA Vehicle Kit
Overview
This section includes a full system installation workflow (below). WatchGuard recommends that
you follow this workflow for best results.
It also includes subsections for installing the following components:
l
Smart Power Switch (
)
l
VISTA WiFi Base (
)
l
Connecting the system to external inputs (
l
Connecting power to the Smart Power Switch (
The final subsection provides instructions for testing the VISTA Vehicle Kit installation (
).
For information on using the VISTA Vehicle Kit, see
.
Recommended Installation Workflow
The following steps make up a recommended workflow for installing the VISTA Vehicle Kit:
Warning!
Only connect cables when this workflow instructs you to. Connecting
cables out of sequence can damage components.
1. Complete all items in the
Before Installing the VISTA Vehicle Kit in a Vehicle
checklist (
).
2. Remove vehicle panels, as needed.
14
VISTA Vehicle Kit
WGD00161 Revision A
