Watchguard ALL-PACK1, Руководство пользователя

Страница: 18 / 23

Programming by Alarm Keypad
Each system installed will requir programming, by app or using the alarm system keypad.
Use the following outline if you programm the system by using alarm keypad.
Enter the password followed by * to start the setup. (default password 1234.)
Code Functions Mark
Password*0#
To delete all enrolled accessories.
Password*1#
Enter Accessories Enrollment State
Password*2#
Password*3#
Password*5*1*xxx#
Password*5*2*xxx#
Password*5*3*xxx#
Password*6*1*xxxxxx#
Password*6*2*xxxxxx#
Password*7*1*xxxxxx#
Password*7*2*xxxxxx#
Password*7*3*xxxxxx#
Password*8*1*xxxxxx#
Password*8*2*xxxxxx#
Password*8*3*xxxxxx#
Password*8*4*xxxxxx#
Password*8*5*xxxxxx#
Start Setup with the app.
Reset the system to default setting.
Set Alarm Duration Time in Minutes
Set Exit Delay Time
Set Entry Delay Time
Store Speed Dailing Number 1
Store Speed Dailing Number 1
Store SMS Number 1
Store SMS Number 2
Store SMS Number 3
Store Phone Number 1
Store Phone Number 2
Store Phone Number 3
Store Phone Number 4
Store Phone Number 5
"
xxx" refer to
minutes values
" xxxxxx" refer
to mobile
phone number