How to use magnetic keys
1. Hold a magnetic key on the left side (contact A)
against the AirWatch in order to turn the AirWatch
on and off.
2. Hold a magnetic key on the right (contact B) side
against the AirWatch in order to activate Alarm re-
set on the Airwatch.
Turning the AirWatch on
1. Activate ‘on/off’ for three seconds to start the Air-
Watch automatically. Starting takes a maximum of
180 seconds and will stop earlier if the sensors are
warm.
2. Then you will get the message ‘Fresh air calibrati-
on’. When you are sure that you are in a safe en-
vironment, activate ‘Yes’ (use contact B).
Warning!
If you are not sure, select “No” (use contact A).
3. The AirWatch will carry out, if selected, a fresh air
calibration for up to 90 seconds.
4. Activate ‘alarm reset’ to switch the AirWatch to
measurement mode.
5. After the startup procedure you can test the pump
by blocking the filter inlet.
On/Off
Contact A
Alarm Reset
Contact B
Check AirWatch sensor specification for detailed sensor information.
*For PH
3
HR , H
2
, ETO , please contact for availability.
