Wasserwerk WK 3, Руководство пользователя

Страница: 16 / 28

16
REPLACING THE CARTRIDGE
• Turn off the water supply.
• Remove the hot/cold badge
 .
• Undo the screw

in the lever

using an Allen wrench.
• Pull off the lever  .
• Remove the attachment ring  .
• Remove the cartridge ring 
using a wrench.
• Remove the cartridge

and
replace it.
• Subsequently put the individual
parts together again.
DECOMMISSIONING
• Cut off the water supply before
dismantling the product.
• Pay attention to escaping
residual water.
• Disassemble the product in the
reverse order of the assembly
instructions.
DISPOSAL
Your kitchen faucet is delivered in
a solid packaging, in order to
protect it against transport dam-
ages. The packaging consists of
recyclable materials. Dispose it
in an environmentally suitable
manner.
Do not throw the product into
the normal domestic waste at the
end of its service life, but ask your
municipal administration about the
possibility of an environmentally
friendly disposal.
SINK FAUCET WITH HIGH,
ARCHED SPOUT
The faucet may drip after use,
even if the lever is shut.
This dripping of water is due to the
design and not a fault.
Water dripping from the faucet is
not cause for complaint!
The illustrations are to be
considered as figurative represen-
tations, deviations of the product
are possible. Subject to technical
modifications.