3. Before securing the cover of your junction box, thread the wires through the slot
on the bottom of the plate to access them during installation.
1. Connect the green and yellow wire from the floodlight to the existing ground
wire inside the junction box. Use the included wire nut to connect the wires
properly.
2. Using a wire nut, connect the white neutral wire from the floodlight to the neutral
wire of the junction box.
3. Using a wire nut, connect the black hot wire from the floodlight to the hot wire of
the junction box.
The white wire on your floodlight is a neutral wire.
The black wire on your floodlight is a hot wire.
Wiring the Floodlight and Junction Box Through the EVA Gasket
Installing Your Floodlight
Page 5 - 8
Neutra Wire (White)
Hot Wire (Black)
Ground Wire
(Copper)
Junction Box
Wire Nuts
Junction Box
Need help? Send us an email at: [email protected]