background image

Page 6 - 8

Installing Your Floodlight

Mounting Your Camera (Ring Spotlight Cam Battery)

1. To charge your camera via the floodlight, remove the charging port cap of the 

camera and connect the floodlight’s charging cable. Press in firmly.

2. Screw the screw converter into the Ring Spotlight Cam Battery.

3. Screw the camera onto the mount.

4. Open the USB port cap of the floodlight and connect the charging cable. Press in 

firmly.

5. Take out the mounting wrench and adjust the Ring Spotlight Cam to your desired 

angle.

Mounting Screw

Charging Port

Need help? Send us an email at: [email protected]

5. Switch on the electricity, checking that the wiring

  has been done correctly and that the floodlight

  turn on.

Important:

 Before mounting the floodlight, completely apply the EVA gasket around the perimeter of the 

cover plate where the back of the cover plate meets the mounting surface. This prevents water from 

seeping into the junction box.

Note: 

The floodlight will provide continuous charging to the USB port 

24/7, however, the motion sensor will only get triggered and turn the 

lights on when it is dark outside (i.e., during night time). 

a. Make sure the wire connections are secured. Carefully place the wires into the 

junction box.

4

4b. Mount the floodlight onto the crossbar and secure it with the screw cap provided. 

Содержание Floodlight with Charger










Отзывы: