Wassermann Wasi-Steam 2, Руководство пользователя

Страница: 10 / 20

7 Start-up/ Installation
Before starting the unit, connect up the following:
Use the water supply hose supplied to connect the steam cleaner (left side) to a tap
(the tap must have a non-return valve and a breather – washing-machine tap).
Connect the drain hose supplied to the left side of the unit (if possible, run the hose
into a heat-resistant container or washbasin as the draining water can be very hot).
Finally , insert the power plug into the socket, making sure that the mains and the
unit operate on the same voltage.
7.1 Filling
Turn on the tap.
Press the green ON/OFF switch – the unit will fill with water automatically and heat
up.
For the initial filling or a refilling after draining the unit please press the black rinse
button on the left side of the device until the pump switches off and the filling is
completed.
This procedure speeds up the filling.
Once the pressure has reached 2 bar, vent the steam vessel once by pointing the
steam gun in the direction of the collector or washbasin and pressing the steam gun
button until the pressure gauge reads 0 ( this only applies to new equipment or
after the pressure vessel has been emptied ).
The operating pressure of 6 bar is reached after about 12 minutes, and the unit is
then ready for use.
10