Wassermann Wasi-Steam 2, Руководство пользователя

Страница: 11 / 20

8 Operation
8.1 General Operating Instructions
All instructions for using the unit, whether in verbal or written form, are based on our own
experience and experimentation and can only be regarded as guidelines.
Use the appropriate switch to select dry steam (4) or wet steam (3).
If you are using wet steam, set the amount of hot water using controller wet steam
(2) on the front of the unit (0 = no water, 5 = max. water).
Use controller steam quantity (1) to set the desired amount of steam (for safety
reasons, the valve is not completely shut in position “0“).
Hold the steam gun in your hand, then release and control the steam using the
button.
If the unit is not used for more than 10 minutes, it switches to stand-by mode
(5 bar). When the steam gun is operated, the unit returns to operating
temperature/pressure (164°C, 6 bar) within 45 seconds.
11