6.3 Storing
Individual set values can be stored by simultaneously pressing Scalding (2) or
Polymerisation (1)
and
Set (4).
A
“YES”
on the display confirms that the values have been stored.
As each new value is stored, the previous value is overwritten.
Warning:
Pressing Scalding (2) or Polymerisation (1)
and
Default (5) resets the
Wassermann default values. Storing the value using Polymerisation (1) and Plus (4) is
confirmed by a
“YES”.
Defaults: Polymerisation
Scalding
Time
Temperature
Time
Temperature
6:30 h
70º C
15 min.
65°C
0:00 h
0º C
1:30 h
95º C
6.4 Special function: “Scalding during polymerisation”
Scalding is possible while the polymerisation process is underway. The last stored
scalding time is used, not at the last stored scalding temperature, but at the default
temperature for the polymerisation process. Scalding is started by pressing Scalding
(2). The scalding process can be stopped by pressing Scalding (2) again.
Warning: All operations, including polymerisation, are stopped if you press Start /
Stop (7)!
- 11 -
Содержание WAPO-Ex
