Wassermann WAPO-Ex, Руководство пользователя

Страница: 10 / 24

8.2 Operation
•
Turn on main switch (green rocker switch).
•
The red water-level LED (10) should not come on or flash. If it does, check the
water level or the water-level sensor.
•
Choose Polymerisation or Scalding.
•
Place prepared caps in unit.
•
Set desired time and temperature for scalding (see 6.2.1).
•
Set desired time and temperature for polymerisation (see 6.2.2).
•
Use Start/Stop (7) to start the program.
•
The yellow LED (9) comes on during heating.
•
After the boiling out programm ends, a tone sounds and the heating and pump are
switched off.
•
After the polymerisation programm ends, the heating is switched off.
10
1
2
3
6
7
5
4
8
9
10
Start/ Stop
Time
Temperature
Heater
Low water level
Digital display
Set / Plus
Default / Minus
Polymerisation
Scalding