Wassermann PRO DAR0355, Руководство пользователя

Страница: 25 / 28

DAR0355
25
CORRECT USE OF STANDARD ACCESSORIES

The washer is equipped with the adjustable nozzle.

Jet adjustment from pencil to fan FIG. 10.
WARNING: DO NOT ADJUST THE NOZZLE WHILE THE TRIGGER IS SQUEEZED.
RECOMMENDED CLEANING PROCEDURE

Dissolve dirt by applying detergent with the fan jet to the dry surface. On vertical surfaces, work from the
bottom upwards. Leave the detergent to act for 1 to 2 minutes, but do not allow to dry out. Apply the
high from the surface, working from the bottom upwards.

Avoid allowing the rinsing water to run on to unwanted surfaces.
STORAGE (FIG.11
– FIG. 13)

Switch off the washer.

Turn off the water supply tap.

After use, the detergent residuals should be removed from the tank.

Discharge residual pressure by pressing the trigger until no more water comes out of the lance nozzle.

Engage the gun safety lock.

Remove the plug from the socket.

Operate the washer with non-corrosive/ non-toxic antifreeze before storing for the winter.
WARNING: BEFORE REUSING, COMPLETELY FLUSH THE UNIT OUT WITH PLAIN WATER. ANTI-
FREEZE CAN DAMAGE PAINTWORK SO YOU MUST ENSURE THERE IS NO ANTI-FREEZE LEFT IN
THE SYSTEM BEFORE USING IT AGAIN.
8. MAINTENANCE
CAUTION
Before working on the washer, disconnect the lug from the power supply socket.

To ensure good performance, check and clean the suction and detergent filters after every 50 hours of
operation FIG. 11.

Clean the nozzle with the tool provided. Remove the lance from the gun; remove any dirt from the
nozzle hole (FIG. 12) and rinse.