Wassermann Dental-Maschinen HSM-500, Руководство пользователя

Страница: 8 / 16

- 7 -
3 Use / Application
The HSM – 500 is designed for working with dental materials such as stainless steels,
plastics, ceramics, etc. in dental laboratories using rotating tools.
Warning!
This tool is not designed as medical equipment.
It is not to be used on human beings.
The tool is not to be used in areas where special conditions apply
(corrosive or potentially explosive atmospheres).
4 Before you start
4.1 Unpacking / Transport
- Open the cartons, remove the packing materials, and carefully lift out the instrument
and accessories. Check that the accessories are correct.
- When transporting the unit, use appropriate packing materials to avoid accidental
damage.
Locate the user manual and read it carefully.
When unpacking, it is important to identify any accidental transport
damage. If necessary, draw up an immediate status report.
Warning! Before starting the tool, check on the right side of the
controller to make sure it is set to the correct voltage (230 V or 115
V). If it is not, use a screwdriver to set it correctly.
!
i
i
!