Wassermann Dental-Maschinen HSM-500, Руководство пользователя

Страница: 10 / 16

- 9 -
5.5 Changing rotating tools
Rotating tools can only be changed when the motorised handpiece
has stopped completely.
Dangerous!
•
Turn the handpiece casing to the right to open the chuck.
•
Remove the rotating tool.
•
Push in the new tool until you feel the stop.
•
Turn the handpiece casing to the left – you will feel and hear it clicking into
place.
Warning! Always turn the handpiece casing up to the stop.
6 Installation
6.1 Installing the motor, mains and foot-switch cables
At the rear of the controller:
•
Insert the motor cable (5-pole) into its socket and turn to the right.
•
Insert the foot-switch cable (3-pole) into its socket and turn it also to the right.
•
Insert the mains cable into the socket on the tool.
•
Turn the tool on at the mains.
The tool is now ready for operation.
!