Wasp Wasp WDI7500, Краткое руководство пользователя, Страница: 33 / 44

LED and Beeper Indications
Quick Reference Guide 25
Good Read
Beep
A label has been
successfully
scanned by the
reader.
LED behavior
for this indica-
tion is configu-
rable via the
feature “Good
Read: When to
Indicate”
(see the PRG for
information.) The reader will
beep once at
current fre-
quency, volume,
mono/bi-tonal
setting and
duration upon a
successful label
scan.
ROM Failure
There is an error
in the reader's
software/pro-
gramming
Flashes
Reader sounds
one error beep
at highest vol-
ume.
Limited Scan-
ning Label
Read
Indicates that a
host connection
is not estab-
lished.
N/A
Reader 'chirps'
six times at the
highest fre-
quency and cur-
rent volume.
Reader Active
Mode
The reader is
active and ready
to scan.
The LED is lit
steadily
a
N/A
Reader
Disabled
The reader has
been disabled by
the host.
The LED blinks
continuously
N/A
Green Spot
a
flashes
momentarily
Upon success-
ful read of a
label, the soft-
ware shall turn
the green spot
on for the time
specified by the
configured
value.
N/A N/A
Image Cap-
ture When ready to
capture image
Blue light
flashes 2 times
when updating
N/A
a
Except when in sleep mode or when a Good Read LED Duration
other than 00 is selected
INDICATOR DESCRIPTION LED BEEPER