© CSP S.r.l.
29
First use of the printer
6.2. Printing bed
NOTE: The printer has been designed to print directly on the working surface so that the machine
can be moved to proceed with new prints.
NOTE: Another option is printing directly on the bed of the printer. This bed needs to be calibrated
on the first use.
To improve the adhesion of the first layers different kinds of beds can be used.
The Manifacturer provides small discs in marine multilayered. Depending on the applications other
kinds of beds can be used. The Z axis value must be updated depending on the thickness of the bed.
6.3. First layer of the print
NOTE:
To make the adhesion of the first layer easier keep the distance with the bed at around 0.5 mm
ATTENTION:
Parts in movement. Moving parts can crush and cut.
Before proceeding with manual leveling, it is necessary to set Z max value, with:
•
Menu>Modify height (select unit)
•
Get close to the printing bed and confim the Z max value
With “Manual leveling” command it is possible to clibrate the planarity of the printing bed.
Screw or unscrew the three screws of regulation checking the distance between nozzle and bed.
By removing the bed of the printer it is possible to print directly on the table or other supports.
Gypsum discs are adviced.
