manualshive.com logo in svg

Wasp DELTA WASP 2040 CLAY, Руководство по использованию и обслуживанию

Поделиться
Скачать
Wasp DELTA WASP 2040 CLAY Скачать руководство пользователя страница 26

© CSP S.r.l. 

26

Preparing to use the printer

1.  Main menu

Machine not printing

•  Main menu: go back to main screen
•  Prepare: allows managing various settings of the printer
•  Advanced: allows managing advanced settings on the printer
•  SD Card menu: access files inside inside the SD Card for printing (only with SD card)
•  Free zeta system: Allows restarting the print from a certain height (only with SD card)
•  Resurrection:  in case of blackout allows recovering the print with the automatically saved coordinates (only 

with SD Card)

•  Info: shows the firmware installed on the printer
•  Main menu: Goes back to the previous menu
•  Disable steppers: disables the motors leaving the printer free to move
•  Auto home: for zeroing the axis1
•  Move axis: allows moving the axis X, Y, Z, E of decided lenghts
•  Modify height: allows changing the distance between nozzle and printing bed
•  Manual leveling: Allows the zeroing of the printer on the three points of regulation

Machine printing

•  Main menu: go back to main screen
•  Tune: allows managing various settings of the printer
•  Pause: allows pausing the print. Click the control handle to resume
•  Change material: allows changing the material during the print.
•  Stop & save: Allows stopping the print to resume it afterwards. A .ressurr file will be created in the original 

directory of the file. Select the .resurr file and wait for the start.

•  Stop print: Allows stopping definitely the printing of a .gcode
•  Info: shows the firmware installed on the printer

Содержание DELTA WASP 2040 CLAY






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды