manualshive.com logo in svg

Wasp DELTA 4070, Руководство по использованию и обслуживанию, Страница: 58 / 88

Поделиться
Скачать
Wasp DELTA 4070 Скачать руководство пользователя страница 58

   P

remises

 

 

© WASP S.r.l. 

8

58

USE OF THE PRINTER

 

8

8.3. Load .gcode

In  the WASP 4.0 line the gcode can be loaded in two ways:

• 

Using a USB pendrive

• 

Using the Wi-fi module

8.3.1. Loading with pendrive USB

1.  Correctly save the file in .gcode format on the pendrive.
2.  Safely remove the pendrive from the computer and insert it into the machine front USB port.
3.  In the machine display  Select “gcode” into “PRINT” menu.
4.  Search for your file’s name and select it for printing.
5.  Once the printing has started, the file is saved inside the machine’s memory and the pendrive can be removed.

8.3.2. Loading with Wi-fi

• 

Access the printer control from your browser.

• 

Enter the “Control” page and click on “Upload gcode”

• 

Wait for the .gcode to load.

• 

At the end the file is selectable for printing.

If the internal memory of the printer is full it will not be possible to add other gcode and you will need to delete 
files to free up space.

Содержание DELTA 4070

























































































Отзывы:

Нет отзывов