manualshive.com logo in svg

Wasp DELTA 4070, Руководство по использованию и обслуживанию, Страница: 22 / 88

Поделиться
Скачать
Wasp DELTA 4070 Скачать руководство пользователя страница 22

   P

remises

 

 

© WASP S.r.l. 

3

22

Description of the printer

 

3

3.2. Unpackaging

ENVIRONMENTAL NOTE:
Once the packaging has been removed from the printer it is recommended to keep it for any 

requests for assistance from the Manufacturer.

The printer will be delivered in a horizontally oriented wooden box.
After removing the printer from the case, you must place the printer upright.

NOTE:
To perform this procedure it is required the presence of three operators because two will take care 

of overturning it and the other will keep it steady on one side.

3.3. Content

The printer is supplied with:

• 

operating and maintenance manual

• 

USB pendrive

• 

power cable including a schuko socket

• 

optional wheels 

• 

Extruder cleaning kit

• 

glue

3.4. Lifting and handling of the printer

ATTENTION:
The weight of the printer is shown in paragraph 2.4 “Technical data”. It is therefore necessary to use 

the lifting equipment whose expected flow is adequate for the weight to be lifted.

ATTENTION:
As long as the printer is not completely raised, it is advisable to check the correct balance of the 

same. During lifting, all the area around the printer is considered dangerous.

ATTENTION:
All small equipment that exceeds the weight of 25 kg must be transported with the appropriate 

equipment, or manually (if not exceeding 50 Kg) by two qualified operators.

Содержание DELTA 4070

























































































Отзывы:

Нет отзывов