Wasp Clay Kit, Начало работы, Страница: 4 / 12

CLAY KIT
INSTALLATION
The Manufacturer declines all liability for injury to persons and
damage to components due to an incorrect use of the product.
WASP certifies the use of the LDM extruder with ceramic material, so
the use of other kind of mixtures or materials has to be considered
as not covered by the technical support and warranty.
3
INFORMATION
Max tank pressure: 40 bar
Overpressure valve calibrated to 8 bar
ATTENTION:
LDM WASP extruder is a professional instrument for the
deposition of dense fluid material as clay mixture, silicons
and experimental materials.
It is equipped with a screw system capable of regulating
the output flow of the material, allowing a rapid flow
interruction and a good retraction control. At the same
time it has the function of a deaerator. Any material that is
to be used requires a specific research.
There are some important factors related to the density,
granulometry and the flowability of the material that must
be analyzed in order to have an easy extrusion and
resistance to collapse.