Wasp Clay Kit, Начало работы, Страница: 3 / 12

Getting Started
2
UNBOXING
The printer must be unboxed with maximum care, following the
instructions on the packaging.
Always handle the machine in at least two people and wearing the
necessary PPE as shown in the manual.
Please keep the original box for it may be needed in case of a
future shipping.
Inside the box you’ll find all you need to start printing:
• Printing mixture 10 Kg
• 3 l aluminum tank
• Nylon tank support with pressure controller
• 1.2 mm and 2 mm diameter nozzle
• Nylon piston
• SD card
• LDM WASP Extruder
• 4 mm diameter nylon air pipe
• 12 mm diameter teflon pipe (cut the pipe at 660 mm for model
Delta WASP 2040, Delta WASP 2040 Turbo, Delta WASP 2040
Turbo 2, Delta WASP 2040 PRO)
• Grease