Wasp Barcode Technologies 633809000201 Скачать руководство пользователя

Страница: 17 / 59

Chapter 4

SMARTPHONE CONNECTION/KEYBOARD

Getting Connected - iOS & Android
1. Press the trigger for 1 second to power up the scanner.
2. Scan below configuration barcode to clear last pairing record.

Touch Keyboard - iOS

To toggle iOS Touch Keyboard, please press this button.

Touch Keyboard - Android
While connected with the scanner, the Touch Keyboard on the Android
smartphone or tablet might disappear. To resolve this issue, please
change settings on Android device with below steps:

1.   Enter “Settings”
2.   Enter “Language & input”
3.   Tap on “Default keyboard”
4.  Turn off “Physical keyboard”, or Turn on “On-screen keyboard” and the
Touch Keyboard will function properly again.

3. Scan below configuration barcode; the scanner will emit several beeps.

4. Select “Wasp Bar/Wireless Scanner” from discovered device list.

5. The scanner will beep twice to verify the connection.

Smartphone/Tablet Connection

Smartphone/Tablet Touch Keyboard

SMARTPHONE/TABLET CONNECTION

Getting Connected - iOS & Android

1. Press the trigger for 1 second to power up the scanner.
2. Scan below configuration barcode to clear last pairing record.

3. Scan below configuration barcode; the scanner will emit several beeps.

SMARTPHONE/TABLET TOUCH KEYBOARD

Touch Keyboard - Android

Touch Keyboard - iOS

To toggle iOS Touch Keyboard, please press this button.

While connected with the scanner, the Touch Keyboard on the

Android smartphone or tablet might disappear. To resolve this

issue, please change settings on Android device with below steps:

1. Enter “Settings”

2. Enter “Language & input”

3. Tap on “Default keyboard”
4. Turn off “Physical keyboard”, or Turn on “On-screen keyboard”
and the Touch Keyboard will function properly again.

iOS Hotkey Button

. E043$

BT mode - HID

*.E043$*

4. Select “Wireless Scanner” from discovered device list.

5. The scanner will beep twice to verify the connection.

Disconnect

. E031$

*.E031$*

Tap to
connect

Slide to
turn off

SMARTPHONE/TABLET CONNECTION

Getting Connected - iOS & Android

1. Press the trigger for 1 second to power up the scanner.
2. Scan below configuration barcode to clear last pairing record.

3. Scan below configuration barcode; the scanner will emit several beeps.

SMARTPHONE/TABLET TOUCH KEYBOARD

Touch Keyboard - Android

Touch Keyboard - iOS

To toggle iOS Touch Keyboard, please press this button.

While connected with the scanner, the Touch Keyboard on the

Android smartphone or tablet might disappear. To resolve this

issue, please change settings on Android device with below steps:

1. Enter “Settings”

2. Enter “Language & input”

3. Tap on “Default keyboard”
4. Turn off “Physical keyboard”, or Turn on “On-screen keyboard”
and the Touch Keyboard will function properly again.

iOS Hotkey Button

. E043$

BT mode - HID

*.E043$*

4. Select “Wireless Scanner” from discovered device list.

5. The scanner will beep twice to verify the connection.

Disconnect

. E031$

*.E031$*

Tap to
connect

Slide to
turn off

SMARTPHONE/TABLET CONNECTION

Getting Connected - iOS & Android

1. Press the trigger for 1 second to power up the scanner.
2. Scan below configuration barcode to clear last pairing record.

3. Scan below configuration barcode; the scanner will emit several beeps.

SMARTPHONE/TABLET TOUCH KEYBOARD

Touch Keyboard - Android

Touch Keyboard - iOS

To toggle iOS Touch Keyboard, please press this button.

While connected with the scanner, the Touch Keyboard on the

Android smartphone or tablet might disappear. To resolve this

issue, please change settings on Android device with below steps:

1. Enter “Settings”

2. Enter “Language & input”

3. Tap on “Default keyboard”
4. Turn off “Physical keyboard”, or Turn on “On-screen keyboard”
and the Touch Keyboard will function properly again.

iOS Hotkey Button

. E043$

BT mode - HID

*.E043$*

4. Select “Wireless Scanner” from discovered device list.

5. The scanner will beep twice to verify the connection.

Disconnect

. E031$

*.E031$*

Tap to
connect

Slide to
turn off

SMARTPHONE/TABLET CONNECTION

Getting Connected - iOS & Android

1. Press the trigger for 1 second to power up the scanner.
2. Scan below configuration barcode to clear last pairing record.

3. Scan below configuration barcode; the scanner will emit several beeps.

SMARTPHONE/TABLET TOUCH KEYBOARD

Touch Keyboard - Android

Touch Keyboard - iOS

To toggle iOS Touch Keyboard, please press this button.

While connected with the scanner, the Touch Keyboard on the

Android smartphone or tablet might disappear. To resolve this

issue, please change settings on Android device with below steps:

1. Enter “Settings”

2. Enter “Language & input”

3. Tap on “Default keyboard”
4. Turn off “Physical keyboard”, or Turn on “On-screen keyboard”
and the Touch Keyboard will function properly again.

iOS Hotkey Button

. E043$

BT mode - HID

*.E043$*

4. Select “Wireless Scanner” from discovered device list.

5. The scanner will beep twice to verify the connection.

Disconnect

. E031$

*.E031$*

Tap to
connect

Slide to
turn off

SMARTPHONE/TABLET CONNECTION

Getting Connected - iOS & Android

1. Press the trigger for 1 second to power up the scanner.
2. Scan below configuration barcode to clear last pairing record.

3. Scan below configuration barcode; the scanner will emit several beeps.

SMARTPHONE/TABLET TOUCH KEYBOARD

Touch Keyboard - Android

Touch Keyboard - iOS

To toggle iOS Touch Keyboard, please press this button.

While connected with the scanner, the Touch Keyboard on the

Android smartphone or tablet might disappear. To resolve this

issue, please change settings on Android device with below steps:

1. Enter “Settings”

2. Enter “Language & input”

3. Tap on “Default keyboard”
4. Turn off “Physical keyboard”, or Turn on “On-screen keyboard”
and the Touch Keyboard will function properly again.

iOS Hotkey Button

. E043$

BT mode - HID

*.E043$*

4. Select “Wireless Scanner” from discovered device list.

5. The scanner will beep twice to verify the connection.

Disconnect

. E031$

*.E031$*

Tap to
connect

Slide to
turn off

SMARTPHONE/TABLET CONNECTION

Getting Connected - iOS & Android

1. Press the trigger for 1 second to power up the scanner.
2. Scan below configuration barcode to clear last pairing record.

3. Scan below configuration barcode; the scanner will emit several beeps.

SMARTPHONE/TABLET TOUCH KEYBOARD

Touch Keyboard - Android

Touch Keyboard - iOS

To toggle iOS Touch Keyboard, please press this button.

While connected with the scanner, the Touch Keyboard on the

Android smartphone or tablet might disappear. To resolve this

issue, please change settings on Android device with below steps:

1. Enter “Settings”

2. Enter “Language & input”

3. Tap on “Default keyboard”
4. Turn off “Physical keyboard”, or Turn on “On-screen keyboard”
and the Touch Keyboard will function properly again.

iOS Hotkey Button

. E043$

BT mode - HID

*.E043$*

4. Select “Wireless Scanner” from discovered device list.

5. The scanner will beep twice to verify the connection.

Disconnect

. E031$

*.E031$*

Tap to
connect

Slide to
turn off

Содержание 633809000201




























































Результаты поиска

Содержание 633809000201

Отзывы:

Похожие инструкции для 633809000201

Бренды по названию

Популярные бренды

Wasp Barcode Technologies 633809000201, Руководство пользователя

Результаты поиска

Содержание 633809000201

Отзывы:

Похожие инструкции для 633809000201

Бренды по названию

Популярные бренды