washloo Clean, Руководство пользователя, Страница: 15 / 23

Installation Guide
Installation of Fixing Bracket
1. Loosen nuts and
attachment bolts holding
original toilet seat on.
2. Remove original toilet seat
and all fasteners
Toilet
Seat
Bolts
Washers
Nuts
1. Place Rubber Expansion Sleeves
into the attachment holes on your
existing toilet.
2. Place the Fixing Bracket on over
the installation holes.
3. Place the Steel Adjustment
Brackets into the Fixing Bracket as
shown.
4. Install the Mounting bolts and
tighten down to ensure the ‘Fixing
Bracket’ is in the correct position.
*The Fixing Bracket can be adjusted
between 120-180mm to allow adjustment
of the Washloo.
Removal of Current Toilet Seat
13
Rubber Expansion
Sleeves
Note : The above illustration is an example only, your version may vary