INSTALLATION & USER MANUAL
4
Installation and User Manual
3
Revision 8.12.2015
BASIC OPERATION
•
Using the operator requires that it has been paired to the remote. Refer to Initial Remote Setup and Configuration.
Opening and Closing of an Operator
1. Press any key to wake up the remote, if the LCD display has powered off.
2. Press
ZONE
to choose a single zone (
1
thru
9
) of operators or
ALL
to operate all operators in all zones.
3. Press
OPEN
or
CLOSE
to open or close the window/skylight.
4. Press
OPEN
or
CLOSE
during operation to
STOP
the operator at any time.
Enable / Disable Automatic Functions
1. Press and hold
AUTO
to show or remove
AUTO
from the display, thus enabling or disabling the temperature control
(
TC
) or Time-to-Close (
P1
) functions.
