WÄRTSILÄ WARTSILA 26, Руководство по эксплуатации продукта

Страница: 20 / 196

ME
IMO Tier 1
ME
IMO Tier 1
AE/DE
IMO Tier 1
AE/DE
IMO Tier 1
Wärtsilä 6L26
340 325 340 325 kW/cyl Cylinder output
1000 900 1000 900 rpm Engine speed
193 190 194 191 g/kWh Fuel consumption at 75% load
196 191 202 198 g/kWh Fuel consumption at 50% load
8.2 7.8 8.2 7.7 kg/h Clean leak fuel quantity, MDF at 100% load
1.6 1.6 1.6 1.5 kg/h Clean leak fuel quantity, HFO at 100% load
Lubricating oil system (Note 5)
450 450 450 450 kPa Pressure before bearings, nom. (PT201)
800 800 800 800 kPa Pressure after pump, max.
30 30 30 30
kPa Suction ability including pipe loss, max.
80 80 80 80
kPa Priming pressure, nom. (PT201)
68 68 68 68 °C Temperature before bearings, nom. (TE201)
78 78 78 78
°C Temperature after engine, approx.
66 60 66 60
m³/h Pump capacity (main), engine driven
55 55 55 55
m³/h Pump capacity (main), stand-by
11 / 13 11 / 13 11 / 13 11 / 13 m³/h Priming pump capacity, 50Hz/60Hz
1.3 1.3 1.3 1.3
m³ Oil volume, wet sump, nom.
2.8 2.6 2.8 2.6
m³ Oil volume in separate system oil tank, nom.
0.5 0.5 0.5 0.5
g/kWh Oil consumption (100% load), approx.
150 150 150 150 l/min/cyl Crankcase ventilation flow rate
0.3 0.3 0.3 0.3 kPa Crankcase backpressure (max)
1.4 / 2.0 1.4 / 2.0 1.4 / 2.0 1.4 / 2.0 l Oil volume in speed governor
High temperature cooling water system
350 + static 350 + static 350 + static 350 + static kPa Pressure at engine, after pump, nom. (PT401)
500 500 500 500 kPa Pressure at engine, after pump, max. (PT401)
81 81 81 81
°C Temperature before cylinders, approx. (TE401)
91 91 91 91
°C HT-water out from the engine, nom (TE402)
35 35 35 35
m³/h Capacity of engine driven pump, nom.
210 210 210 210
kPa Pressure drop over engine
60 60 60 60
kPa Pressure drop in external system, max
70...150 70...150 70...150 70...150 kPa Pressure from expansion tank
0.3 0.3 0.3 0.3
m³ Water volume in engine
Low temperature cooling water system
280 + static 260 + static 280 + static 260 + static kPa Pressure at engine, after pump, nom. (PT471)
500 500 500 500 kPa Pressure at engine, after pump, max. (PT471)
25...38 25...38 25...38 25...38 °C Temperature before engine (TE471)
47 42 47 42
m³/h Capacity of engine driven pump, nom.
60 60 60 60 kPa Pressure drop in external system, max.
50 50 50 50 kPa Pressure drop over charge air cooler
16 16 16 16 kPa Pressure drop over oil cooler
70...150 70...150 70...150 70...150 kPa Pressure from expansion tank
3-2 Wärtsilä 26 Product Guide - a9 - 7 September 2016
Wärtsilä 26 Product Guide 3. Technical Data