Wärtsilä JOVYTEC PMS 2002K / 3002K BAX 4837E
- 17 -
6.
Electrical connection
The UPS unit in the series POWERMASTER is simply connected by means of the supplied input cable and
the input socket.
One proceeds as follows:
1.
Plug the mains input cable provided into the suitable power socket.
2.
Attach the critical loads by means of the output sockets.
3.
Connect up the battery pack supplied by means of the the battery connection.
4.
All connecting up work is now complete.
P L E A S E N O T E
!
Only trained personnel are allowed to work on the UPS unit.
Observe all corresponding safety regulations.
Marking of cables is to be according to DIN EN 60445!
When connecting to the UPS unit, ensure use of an adequately sized protective-
conductor connection!
P L E A S E N O T E
!
When working on the batteries it is possible for dangerous situations to arise
due to a high DC voltage and high short-circuit currents.
This work on the device must only be conducted when accompanied by use of
suitable protective measures such as insulated tools, eye and hand protection
etc.
