SyMBOLS
7
EN
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
DANGER indicates a hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which,
if not avoided, could result in minor or moderate
injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation
that may result in property damage.
SERVICE
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. For service we suggest you return the
product to your nearest AUTHORIZED SERVICE CENTER
for repair. When servicing or repair, use only identical
OEM replacement parts otherwise you will void any
warranty offered.
WARNING
To avoid serious personal injury, do not attempt to
use this product until you have read this Owner’s
Manual thoroughly and understand it completely.
If you do not understand the warnings and
instructions in this Owner’s Manual, do not use this
product.The operation of any power tool can result
in foreign object being thrown into your eyes, which
can result in severe eye damage. Before operating
a power tool, always wear safety goggles, safety
glasses with side shields, ear protection and(or) a
fully face shield when needed. We recommend a
Wide Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields. Always
use eye protection that is marked to comply with
ANSI 287.1 as well as suitable ear protection.
WARNING
The operation of any power tool can result in foreign
object being thrown into your eyes. which can result
in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety
glasses with side shields and, when needed, a full
face shield. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection
which is marked to comply ANSI 287.1 as well as
suitable ear protection.
