Page 8
For technical questions, please call 1-888-866-5797.
Item 59437
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Symbology
V
Volts
Direct Current
A
Amperes
n0 xxxx/
min.
No Load Revolutions
per Minute (RPM)
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved safety
goggles with side shields.
Read the manual before
set-up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover Charger
ventilation ducts.
Charge on fireproof surface only.
WARNING marking concerning
Risk of Electric Shock.
Properly connect Charger’s
power cord to appropriate outlet.
WARNING marking concerning
Risk of Explosion.
Do not puncture, short, or open
battery packs and do not charge
damaged battery packs.
Specifications
Battery Pack
12 VDC Li-ion, 1.3Ah
Charger Input
120 VAC / 60 Hz / 200 mA
Charger Output
12.6 VDC / 450 mA, 6.0 W
Tool Speed
n0: 5000-32000/min
Maximum Accessory Diameter
Ø35mm
Setup - Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Functions
cutoff
Discs
Grinding
Stone
Wrench
Sanding
Drums
Buffing
Wheel
polish
compound
Disc
Mandrel
collet
Spindle
Lock
Speed
control
Battery
pack
Wire
Wheel
Small Drum
Mandrel
Large Drum
Mandrel
Drill
Bit
Screw
Mandrel
power
Button
charger
