WARPP INTIG-315 AC/DC, Руководство по эксплуатации

Страница: 7 / 39

-
７
-
Installation
1
．
Installing situation
(1) Must place welding machine in the room where is no straight
sunlight, no rain, less dust, low humidity, and temperature
range of -10
℃～
+40
℃
(2) The gradient of ground must be no more than 15
°
(3) Ensure no wind at the welding position, or use screen to block
the wind.
(4) The distance between welder and wall must be more than
20cm, between welders more than 10cm to ensure enough heat
radiation.
(5)
When using water cooled gun, must be care of not being
frozen.
2
．
Requirement of input volt:
(1) Input volt must be standard sine wave, effective value
380V
±
10%,frequency 50Hz/60Hz
(2) Unbalance degree of 3- phase volt must be no more than 5%
3. Power supply: .