WARPP INARC 200 IDS, Руководство по эксплуатации

Страница: 10 / 19

4. Conversion switch choose (left), MMA, refer to
§
3.3.1
choose (right), cellulose stick, refer to
§
3.3.2
* This is the control panel of the machine with arc force adjustment function.
§
4.2 Welding current adjustment
Welding current range is 5
– 200A.
This machine has the function of welding current pre-setting. Before welding, adjusting welding current,
the welding current display will show the ampere. It is convenient to set parameters and adjust
accurately.
§
4.3 Welding operation
§
4.3.1 Striking arc way
●
Knocking arc: take the electrode upright to touch the workpiece, after forming short circuit, quickly lift
up about 2-4 mm, and arc will be ignited. This method is difficult to master. But in the welding for the
brittle or hard steel, it is better to use knocking way.