WARN INDUSTRIES
PAGE 4
61285 Rev C0
FRONT-RECEIVER INSTALLATION:
5.
Remove the front skid-pan, by removing the four bolts that attach it to the frame, using a
10mm and 12mm wrench.
6.
As shown in the Figure 4 below, attach the lower support bracket to the front of the
frame, using two M8 X 1.25 X 25mm bolts and Nylock nuts. Leave the bolts loose for
now.
FIGURE 4
7.
Remove the three screws on each side of the bike as shown in the Figure 5 below,
inorder to patially remove the plastic side walls. This will help better facilatate installation.
FIGURE 5
