WARN INDUSTRIES
PAGE 6
80361A1
©2009 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Figure 8 Fasten Winch Mounting Plate
Rear Contact Surface
B1
B2
Front Contact Surface
B3 & B4
Figure 9 Install Winch and Roller Fairlead
Install Winch From Left
Roller Fairlead
4.
Install winch from the left side of the vehicle, as
sitting on the vehicle, Figure 9. Fasten winch
with hardware supplied with the winch. Mount
the winch so that the motor faces the right side
of the vehicle. Tighten the bolts to a
recommended torque of 17 N-m (12 ft-lb).
Also attach roller fairlead to the winch mounting
plate, Figure 9, using two hardware provided in
the winch kit. See instructions included in
winch kit for recommended torque.
5.
Switch the winch clutch to freespool. Manually
feed the winch cable through the roller fairlead.
Attach the clevis hook to the end cable loop,
Figure 10. Reinstall front skid plate with original
hardware from step 1 and securely tighten.
6.
Complete the winch installation as described in
the winch installation and specification guide
that came with the winch.
Plow and winch mount installation is now
complete and should look like Figure 10.
Figure 10 Complete Winch Installation
Clevis Hook
Front Skid Plate
B2
