©2021 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
6
108376A0
I N S T A L L A T I O N I N S T R U C T I O N S
6. Install fairlead to the fairlead plate (sold separately).
7. From the front of the vehicle, insert the fairlead bracket
assembly between the winch and the plow mount.
NOTE: Be sure the winch rope’s loop is through fairlead.
8. With all components in position, push the bumper
back in place and reinstall the upper and lower bumper
mounting hardware (
see previous steps 2 and 3
).
TIP: At this time, it may be helpful to use a small Phillips
screw driver to aid in aligning the components, before
installing the bolts.
9. From under the bumper, install four M8 bolts (B1) and
washers (B2) to secure the plow mount, fairlead bracket
and winch to the vehicle. Torque bolts to specifications
on page 3.
NOTE: You will use the supplied longer M8 hardware
(B1 & B2) when using a fairlead plate/fairlead combo
shown in these instructions. If your vehicle’s bumper
is equipped with a fairlead mounting plate, you will
use the M8 hardware that came with your winch kit.
Figure 7
Figure 8
Figure 9