Warn 108000, Руководство по установке, Страница: 4 / 7

©2021 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
4 108376A0
I N S T A L L A T I O N I N S T R U C T I O N S
1. From under vehicle, remove the six Torx head screws
from the front plastic skid plate, giving you access
to the winch mounting holes. Save hardware for
reinstallation.
NOTE: If vehicle is equipped with a winch, remove now.
* Disconnect the power leads from the battery.
* Disconnect the yellow and blue cables from the
winch.
* Remove the four bolts securing the winch to the
mount.
* Slide the winch out through the side of the bumper.
2. Remove the three lower hex heads screws. Save
hardware for reinstallation.
3. Remove the upper hex head bolt from each side of the
bumper. Save hardware for reinstallation.
Remove
Figure 1
Figure 2
Figure 3
Remove
Remove